Room Temperature Controller Smart 55/63
The Room Temperature Controller Smart is available in 55mm and 63mm versions:
| SCN-RTR55S.01 |
Room Temperature Controller Smart 55 |
To fit 55mm systems/ranges, white glossy finish |
| SCN-RTN55S.01 |
Room Temperature Extension Unit Smart 55 |
To fit 55mm systems/ranges, white glossy finish |
| |
|
|
| SCN-RTR63S.01 |
Room Temperature Controller Smart 63 |
To fit 63mm systems/ranges, studio white glossy finish |
| SCN-RTN63S.01 |
Room Temperature Extension Unit Smart 63 |
To fit 63mm systems/ranges, studio white glossy finish |
Description
The MDT Room Temperature Controller Smart with integrated temperature and humidity sensor is used for indoor
room temperature regulation. Switch Acuators/Heating Actuators with electrothermic valves or motorized KNX actuators
can be controlled by the Room Temperature Controller. Additionally the Room Temperature Controller Smart has 4 binary
inputs to connect potential free contacts.
The MDT Room Temperature Extension Unit Smart with integrated temperature and humidity sensor is used for indoor
room temperature regulation. The Extension Unit can either act as second device in conjunction with the MDT Room
Temperature Controller Smart (integrated temperature controller !) or as single device with the MDT AKH Heating
actuator (integrated temperature controller).
- Production in Germany certified according to ISO 9001
- Available for 55mm and 63mm systems/ranges
- Active colour display to indicate function and status
- Background colour w/b and display brightness adjustable
- Display of set and actual temperature
- For indoor temperature controlling
Range -10 to +50°C
- Selectable temperature controller (PI, Two-position, PWM)
- Simple setpoint adjustment via separate +/- buttons
- 1Bit +/-, 1Byte oder 2Byte absolute object for setpoint adjustment
- Setpoint values are stored at bus voltage failure
- Limit values min/max, frost protection alarm, min/max memory
- Operation mode can be set via Bit/Byte objects
- Temperature and humidy sensor with dew point calculation
- Message when leaving the comfort zone
- 4 binary inputs to connect potential free contacs
(push-buttons or window/auxiliary contacts)
- Ventilation control by hand or automatic operation
- 14Byte object for plain text diagnostic
- Installation in a installation box with included support ring
Recommended installation height: 1,6m
Length of connection cables: 22cm
- Integrated bus coupling unit
- 3 years warranty
60mm system Switzerland