02.03.2018 New picture price list available in the download area
You find the new products in our new pricelist 2018.
26.01.2018 light and building 2018
Visit us in Frankfurt at the light and building trade far from 18.-23.3.2018 in Frankfurt.
You find us in hall 9.1 C80 and C81. We are looking forward to your visit.
21.09.2017 New series of MDT LED Controllers
The new series of MDT LED Controllers detectors has a new and extensive application with the following new features:
08.09.2017 New series of MDT Presence Detectors
The new series of MDT presence detectors has a new and extensive application with the following new features:
23.06.2017 Ranga Yogeshwar presented the TOP 100 Innovation Award for the second time
MDT technologies GmbH again belongs to the most innovative companies of the German midmarket companies.
Ranga Yogeshwar presented the coveted TOP 100 Award on 23 June 2017 at the 4th. German midmarket summit in Essen.
MDT technologies has already made the leap into a row to an innovation elite for the second time. In the independent
and ambitious selection process, MDT technologies was particularly successfulwith its innovative success for years to come.
>>> More informations
01.03.2017 New pricelist online
You find the new products in our new pricelist 2017.
20.02.2017 New safety function for KNX IP Line Coupler
To increase the security of a building from remote access, a new product database V1.1 for the MDT line coupler SCN-LK001.01
(hardware release R2.1) is available now.
The new parameter Configuration from subline - enable / disable has been implemented into the product database. This parameter
is used to block the programming of the line coupler and the higher devices (main line) from the subline. A manipulation of the
KNX system from the outside line is no longer possible.
Important parameters which are necessary for building security like Filter group telegrams and Block physical telegrams can not
be changed. Also the access on group addresses in the main line is protected against manipulation.
The MDT line coupler SCN-LK001.01 with the new product database V1.1 has new safety function and can be used in every smart home.
>>> MDT Line Coupler with new safety function
Device Configuration App (DCA) to upload particular icons
The free app for the ETS5 can be downloaded here and in the KNX online shop. After the installation the app is available in the menu item DCA of the Glass Push Button application.
>>> DCA for Glass Push Button II Smart
24.06.2016 MDT technologies is one of the TOP 100
Ranga Yogeshwar presented the TOP 100 Award on 24 June in Essen/Germany.
The 23rd TOP 100 awards for Germany's most innovative SMEs are about to be presented, and this year, MDT technologies GmbH is joining
this elite group. Ranga Yogeshwar, the competition mentor, will present the top innovator MDT technologies at the German SME Summit
in Essen on 24 June.
>>> More informations
The new VisuControl software is online. Visualizations can be created easily with the
new demo projects and the suitable ETS project.
10.03.2016 New pricelist online
You find the new products in our new pricelist 2016.
05.01.2016 light and building 2016
Visit us in Frankfurt at the light and building trade far from 13.3-18.3.2016 in Frankfurt. You find us in hall 9.0/C81. We are looking forward to your visit.
09.11.2015 New generation: Bus Power Supply monitors an complete KNX line !
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit provides several diagnosis functions:
29.10.2015 !!! World Innovation !!! MDT IP Interface/Router sets new standards
The new generation of the MDT IP Interface/Router sets new standards in functional range.
Additionally to the well knows functions the new MDT IP Interface/Router offers unique innovations:
31.08.2015 New Universal Interface available
The MDT Universal Interface for 230V signals detects changes on the inputs and sends a telegram on the bus.
You can connect conventional 230V push buttons, switches and presence detectors.
The new Universal Interface is available now.
06.07.2015 New compact switch actuators with faincoil operation available
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads
In addition to the functions as compact switch actuator following functions are available in fancoil mode:
01.07.2015 LED Controller for MDRC mounting
The MDT LED Controller controls 12/24V RGBW LEDs (Common Anode, Constant Voltage).The max. LED capacity is 384W at a
current of 4A for each channel. The device can be controlled by RGB and HSV colour space. At HSV operation colour and brightness
can be adjusted with a normal KNX push button. Extensive scene functions, definable colours and predefined sequences are available.
Alternatively the device can control up to 4 independent groups of white LEDs. The integrated 16A C-load relay switches the external
power supply. The controller can be customized via selectable dimming curves to the LEDs. For sensitive persons the PWM frequency
can be set to 1000Hz. The LED Controller for MDRC mounting (4SU) is now available.
16.04.2015 ETS5 product data for KNX RF+ devices
The new ETS5 product data files(*.knxprod) for KNX RF+ devices are available in the download area.
20.03.2015 New pricelist online
You find the new Bus Power supplies with diagnostics, the analog In-/Outputs, RGBW LED Controller for MDRC and the shiny push buttons for 55mm systems in our new pricelist 2015.
21.01.2015 Glass Central Operation Unit
The MDT Glass Central Operation Unit with large LCD display, integrated room temperature controller and logical functions optionally shows inside/outside temperature, the desired value, current time and sunrise/sunset time. There are 2 direct switching functions (light, shutter) and 20 other functions (via menu) selectable. With a single touch you select the desired value and the operating mode (e.g. comfort or standby). The ventilation can be controlled stepwise by hand or automatically. Alarm or text messages are received as 1bit or 14byte telegrams. The devices are available in white or black (Glass 92x92mm), the bus coupling unit is integrated.
19.01.2015 Switch Actuators with active power measurement
The new MDT Switch Actuators with active power measurement switches up to 6 loads. Each output has a rating up to 20A(C-load), a LED and a push button for manual operating. Effective performance data like current, voltage, active- and reactive power and are available for each channel and in total summation. After over-/undershoot or master/slave (reaction 1s) devices can also be switched off after e.g. 20s. By the adjustable switching threshold the hour meter only counts the real switch-on times without standby times. The actuator has an extensive application. The devices are available with 3 channels with 4SU case and with 6 channels with 8SU case.
15.12.2014 New pricelist online
You find the new Switch Actuators with active power measurement and the Glass Central Operation Unit in our new pricelist 2014.
31.01.2014 light and building 2014
Visit us in Frankfurt at the light and building trade far from 30.3-4.4.2014 in Frankfurt. You find us in hall 9.0/C81. We are looking forward to your visit.
08.07.2013 New pricelist online
You find the new RGB LED Controller, LED Indicator, Mixed gas/CO2 sensor, Glass Presence Detector and the brand new KNX RF+ devices like KNX RF+ Line Coupler, KNX RF+ Glas Push Button and KNX RF+ Switch- and Shutter Actuators in our new pricelist 2013.
06.05.2013 The new "Online KNX Product Catalog" ETS App is available !
Due to the success of KNX, also the range of available KNX products is extending. From now on our applications are
directly available inside the ETS4 with the new „Online KNX Product Catalog“ App from the KNX Association.
The App differs by manufacturer, language and availability per country. It is no longer necessary to download
complete product catalogs. This ETS App is especially interesting for beginners and regular users.
You can download the App after the login in the KNX Onlineshop. You find the App in the menu item "New order">>> Download App
04.02.2013 New MDT Presence Detectors
The new presence detectors with high resolution lens and 4 pyro sensors detects smallest movements. With day/night control is possible to use different objects: for example during the day 100% light and during the night 30% light or send an alert message only. The sensitivity for standby (medium) and presence (high) can be set individually. The 4 sensors can be dedicated to 2 zones
(eating room / living room). A new function will ignore a passing person in the corridor. A proportional master-slave control is used for constant light intensity to control up to 3 light-bands (window, middle, wall).
21.11.2012 MDT Switch Actuators with current measurement - Now with True RMS rating
The MDT Switch Actuators AMI and AMS with current measurement have now an advanced application with new functions starting from version R2.0.
13.04.2012 KNX innovaton - MDT KNX RF Glass push Buttons
To upgrade your installation without placing KNX bus cables. The MDT KNX RF Glass Push Button is operating in bidirectional KNX RF system mode and is perfectly suited to replace conventionel push buttons in existing installations without placing KNX bus cables.
The connections to the KNX bus is realized via the MDT KNX RF Line Coupler.
13.04.2012 Not enough space inside your power distribution board? the new Switch Actuators series AKS
the new AKS series offers more channels at less space, so lower costs per channel.
02.04.2012 New pricelist online
At the light and building trade far we present our new products. You find the new Switch Actuators series, Glas Push Buttons, Multimediagateway and the KNX RF like KNX RF Line Coupler, KNX RF Glas Push Button and KNX RF Switch- and Shutter Actuators in our new pricelist 2012.
02.12.2011 light and building 2012
Visit us in Frankfurt at the light and building trade far from 15.-20.4.2012 in Frankfurt. You find us in hall 9.0/F40. We are looking forward to your visit.
18.11.2011 Dali Gateway
Dali Gateway for controling up to 64 ECG available. Allows commissioning without KNX via integrated webserver.
19.10.2011 New Switch Actuators
New Switch Actuators with current measurement available.
01.05.2011 Room Temperature Controller
Room Temperature Controller with adjustment knob to fit 55mm programs is available.
04.04.2011 New Switch Actuators
We have expanded our products with small Switching Actuators.
05.02.1011 Logical Module
The new Logical Module is available.
20.12.2010 Dimming Actuators
The new Dimming Actuators are available.
29.09.2010 KNX Push Buttons
Push Buttons to fit switches with 55mm rocker are available.
18.08.2010 Surface mounted devices
Switching Actuator, Binary Input and Shutter Actuator are available as surface mounted device.
08.07.2010 New functions
The Binary Inputs and the Universal Interface have been extended with new functions.
19.05.2010 Production video
Have a look at our production video.
23.02.2010 light and building 2010
Visit us in Frankfurt at the light and building trade far. You find us in hall 9.0/F40. We are looking forward to your visit.
08.02.2010 New Presence Detectors
The new MDT Presence Detector is available in 2 versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. Both Presence Detectors capturing the smallest movements with their 4 built in pyrodetectors and high resolution lens.
17.08.2009 Elektrotechnik 2009
Visit us in Dortmund at the Elektrotechnik trade far. You find us in hall B3/3176. We are looking forward to your visit.